|
Automatic Capacitor Banks
Description
LIFASA automatic capacitor banks are used for centralized compensation of power factor in low voltage installations.
These equipments are supplied completely assembled and ready for use: it is only necessary to connect it to the mains with cables of adequate cross section, and to supply the
operation signal from a suitable current transformer.
General CharaCteristiCs
LIFASA automatic capacitor banks are composed of the following elements:
High rupturing capacity (HRC) fuses connected to a busbar system.
Contactors specially adapted to the work with capacitors.
Inrush current limiting inductances.
Fast discharge resistors.
Low losses power capacitors.
Reactive power controllers.
Terminals for neutral and ground conductors.
Metal cabinet containing all the switchgear.
Advantages
Equipments wired and tested at works, full finished and supplied with all control and safety devices.
Easy transportation and installation due to their light weigh.
Easy selection of the most appropriate cos φ to avoid penalty charges on tariffs.
Long life and high reliability, thank to the use of selfhealing and low losses capacitors.
Wide range of power (from 5 to 1600 kvar, 440 V) with standard equipments for immediate delivery.
Option of including various accessories.
Technical characteristics
Rated voltages |
230 / 440 /690 V |
Rated frequency |
50 Hz - 60 Hz |
Rated power |
5 ... 1600 kvar |
Dielectric losses |
< 0.2 W/kvar |
Capacitors losses |
< 0.5 W/kvar |
Maximum overvoltage |
1.1 Un (8h/dia/day) |
Maximum overcurrent |
1.3 In |
Fast discharge resistors |
On each contactor |
Regulation equipment Reguladores |
MCE ADV or Master controller |
Working programs |
1:1:1:1 / 1:2:2:2 / 1:2:4:4 /1:2:4:8 / 1:1:2:2 / … |
Control voltage |
230 V |
External current transformer |
... /5 (Opcional/Optional) |
Temperature range |
-25oC/+45 oC max. temp. |
Degree of protection |
|
Standars |
, , , |
SpeCial equipMent
On request, automatic capacitor banks can be produced to customers special requirements. Among the different possibilities are the following:
Other voltages and frequencies.
Capacitor banks with different degrees of protection.
Capacitor banks for outdoor installation.
Working program 1:2:4:4:, 1:2:4:8:,1:1:2:2:.
Fixed step (for transformer compensation).
Higher powers than the above stated.
BATM 5-180 kvar
WALL MOUNTED AUTOMATIC CAPACITOR BANK
DesCription
LIFASA automatic capacitor banks are used for centralized compensation of
power factor in low voltage instalations.
These equipments are supplied completely assembled and ready for use:
it is only necessary to connect it to the mains with cables of adequate cross
section, and to supply the operation signal from suitable current transformer. Wall mounting equipment. POLIMET capacitors.
TeChniCal CharaCteristiCs
Tensión nominal/Rated voltages......................440 V 50 Hz - 60 Hz
Regulador/Controller ........................................MCE ADV
Programa de trabajo/Working program .........5 opciones
5 options
Condensadores/Capacitors .............................POLB 440 V
Protección/Protección steps .............................Magnetotérmico / MCB
Grado protección/Degree of protection ......
Color/Colour .......................................................RAL 7035
Entrada cables/Cables entry ..........................Inferior/bottom
Instalación/Installation ......................................Interior/Indoor
Montaje/Assembly .............................................Mural/Wall mounting
Tensión aux. 230V/Aux. voltage 230V .......Autotrafo/ Autotransformer
Interruptor autom./Circuit breaker .................Hasta/Up Qn=40 kvar (...I)
TI externo/External TI ....................................... .../5A (no incl./not included)
a ccesorios /a CCessories
Interruptor general automático o de corte en carga...............Qn>40kvar/440V
Main switch or circuit breaker H≥700mm
Protección diferencial / Leakage protection
| Part number |
Qn (kvar)
440 V |
Composition |
Steps |
Program |
Qn (kvar)
400 V |
Cabinet
(H x L x P) |
(kg)
Weight |
(�)
Price |
| BATM0844050I |
5 |
2x1.25+2.5 |
4x1.25 |
1.1.2 |
4.1 |
500x400x200 |
18 |
722 |
| BATM0844087I |
8.75 |
1.25+2.5+5 |
7x1.25 |
1.2.4 |
7.2 |
500x400x200 |
18 |
800 |
| BATM0844125I |
12.5 |
1x2.5+2x5 |
5x2.5 |
1.2.2 |
10.3 |
500x400x200 |
18 |
865 |
| BATM0844175I |
17.5 |
2.5+5+10 |
7x2.5 |
1.2.4 |
14.5 |
500x400x200 |
19 |
892 |
| BATM0844200I |
20 |
2x5+1x10 |
4x5 |
1.1.2 |
16.5 |
500x400x200 |
19 |
900 |
| BATM0844250I |
25 |
5+2x10 |
5x5 |
1.2.2 |
20.6 |
500x400x200 |
20 |
919 |
| BATM0844275I |
27.5 |
2.5+5+2x10 |
11x2.5 |
1.2.4 |
22.7 |
500x400x200 |
20 |
1.179 |
| BATM0844312I |
31.25 |
6.25+2x12.5 |
5x6.25 |
1.2.2 |
25.8 |
500x400x200 |
20 |
940 |
| BATM0844350BI |
35 |
5+3x10 |
7x5 |
1.2.2 |
29 |
500x400x200 |
22 |
1.225 |
| BATM0844375BI |
37.5 |
2.5+5+3x10 |
15x2.5 |
1.2.4 |
31 |
500x400x200 |
23 |
1.279 |
| BATM0844400BI |
40 |
5+5+3x10 |
8x10 |
1.1.2 |
33 |
500x400x200 |
23 |
1.295 |
| BATM0844437BI |
43.75 |
6.25+3x12.5 |
7x6.25 |
1.2.2 |
36 |
500x400x200 |
30 |
1.23 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Part number |
Qn (kvar)
440 V |
Composition |
Steps |
Program |
Qn (kvar)
400 V |
Cabinet
(H x L x P) |
(kg)
Weight |
(�)
Price |
| BATM0844500 |
50 |
10+2x20 |
5x10 |
1.2.2 |
41.3 |
700x500x260 |
32 |
1.4 |
| BATM0844550 |
55 |
5+10+2x20 |
11x5 |
1.2.4 |
45 |
700x500x260 |
35 |
1.47 |
| BATM0844625 |
62.5 |
12.5+2x25 |
5x12.5 |
1.2.2 |
51.7 |
700x500x260 |
37 |
1.391 |
| BATM0844687 |
68.75 |
6.25+12.5+2x25 |
11x6.25 |
1.2.4 |
56.8 |
700x500x260 |
38 |
1.534 |
| BATM0844700 |
70 |
10+3x20 |
7x10 |
1.2.2 |
58 |
700x500x260 |
38 |
1.58 |
| BATM0844750 |
75 |
5+10+3x20 |
15x5 |
1.2.4 |
62 |
700x500x260 |
39 |
1.803 |
| BATM0844800B |
80 |
2x10+3x20 |
8x10 |
1.1.2 |
66 |
700x500x260 |
39 |
1.86 |
| BATM0844937 |
93.75 |
6.25+12.5+3x25 |
15x6.25 |
1.2.4 |
77.5 |
700x500x260 |
40 |
1.925 |
| BATM08441000B |
100 |
2x12.5+3x25 |
8x12.5 |
1.1.2 |
82.5 |
700x500x260 |
40 |
2.121 |
| BATM08441050 |
105 |
15+3x30 |
7x15 |
1.2.2 |
87 |
700x500x260 |
41 |
2.046 |
| BATM08441125 |
112.5 |
7.5+15+3x30 |
15x7.5 |
1.2.4 |
93 |
700x500x260 |
41 |
2.158 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Part number |
Qn (kvar)
440 V |
Composition |
Steps |
Program |
Qn (kvar)
400 V |
Cabinet
(H x L x P) |
(kg)
Weight |
(�)
Price |
| BATM1844118I |
118.75 |
6.25+12.5+4x25 |
19x6.25 |
1.2.4 |
98 |
800x600x260 |
80 |
2.19 |
| BATM1844125I |
125 |
12.5+12.5+4x25 |
18x12.5 |
1.2.4 |
103 |
800x600x260 |
81 |
2.225 |
| BATM1844137I |
137.5 |
12.5+5x25 |
11x12.5 |
1.2.2 |
114 |
800x600x260 |
83 |
2.25 |
| BATM1844142I |
142.5 |
7.5+15+4x30 |
19x7.5 |
1.2.4 |
118 |
800x600x260 |
84 |
2.275 |
| BATM1844150I |
150 |
15+15+4x30 |
10x15 |
1.1.2 |
124 |
800x600x260 |
85 |
2.3 |
| BATM1844165I |
165 |
15+5x30 |
11x15 |
1.2.2 |
136 |
800x600x260 |
86 |
2.4 |
| BATM1844180I |
180 |
6x30 |
6x30 |
1.1.1 |
149 |
800x600x260 |
87 |
2.5 |
Other ratings, voltages and frequencies available on request.
BATM080
BATM0844050I BATM0844400
BATM0844075I BATM0844437
BATM0844100I BATM0844500
BATM0844125I BATM0844550
BATM0844137I BATM0844600
BATM0844150I BATM0844625
BATM0844175I BATM0844700
BATM0844187I BATM0844750
BATM0844200I BATM0844800
BATM0844250I BATM0844800b
BATM0844275I BATM0844875
BATM0844300I BATM08441000
BATM0844312I BATM08441000b
BATM0844350BI BATM08441050
BATM0844375BI BATM08441125
BATM0844400BI BATM08441200
BATM0844350 BATM08441200b
BATM0844375
| 
