POLE MOUNTED SUPPORT ARM WITH CHAIN TIGHTENER
• The Stand Off Support Arm is designed for temporary support of conductors up to 1 1/16” O.D.
It is ideal for replacing conductors and insulators, single phase and three phase armless construc-
tion. It also provides an excellent means of conductor support when changing crossarms, hardware
and performing routine maintenance.
• Constructed of 2 1/2” O.D. foam filled fiberglass
• Fits pole diameters up to 14”
• Easy to install - has spring take up chain tightener
• Conductor holders are adjustable
| CAT NO |
DESCRIPTION |
MAXIMUM VOLTAGE PHASE TO PHASE |
LOAD LIMIT POUNDS PER HOLDER |
LBS |
| 5018 |
34” OVERALL LENGTH WITH ONE
CONDUCTOR HOLDER |
15 KV |
200 |
14.0 |
| 5019 |
34” OVERALL LENGTH WITH ONE
CONDUCTOR HOLDER AND INSULATOR |
34.5 KV |
200 |
15.0 |
| 5020 |
48 1/2” OVERALL LENGTH WITH TWO
CONDUCTOR HOLDERS |
15 KV |
150 |
17.0 |
| 5021 |
48 1/2” OVERALL LENGTH WITH TWO
CONDUCTOR HOLDERS AND INSULATORS |
34.5 KV |
150 |
18.0 |
POLE MOUNTED SUPPORT ARM WITH RATCHET BINDER AND NYLON STRAP
• Safety Ratchet Binder and Nylon Strap eliminates hazards of chains and chain tighteners when being
used in primary voltage areas
• Installation and removal of arms is quick and easy
• Ratchet Binder has extra wide handle for easy operation when wearing rubber gloves
• 2” wide nylon strap is 44” long to accommodate most structures
(Note: Periodic inspection of straps for wear is required.)
CAT NO DESCRIPTION MAXIMUM
VOLTAGE
PHASE TO PHASE
LOAD LIMIT
POUNDS
PER HOLDER
LBS
5038 34” OVERALL LENGTH WITH ONE CONDUCTOR HOLDER 15 KV 200 12.0
5039 34” OVERALL LENGTH WITH ONE CONDUCTOR HOLDER AND
INSULATOR
34.5 KV 200 13.0
5040 48 1/2” OVERALL LENGTH WITH TWO CONDUCTOR HOLDERS 15 KV 150 15.0
5041 48 1/2” OVERALL LENGTH WITH TWO CONDUCTOR HOLDERS
AND INSULATORS
34.5 KV 150 16.0
5042 REPLACEMENT NYLON STRAP FOR ABOVE UNITS 0.5
5049 REPLACEMENT NYLON STRAP WITH HOOK FOR ABOVE UNITS 1.0
