TEMPORARY DEAD END ARM
The Temporary Dead End Arm enables a line crew to spread conductors off an existing dead end arm to gain
working clearance to replace and terminate new conductors.
FEATURES AND BENEFITS:
• Arms are constructed with 3” diameter fiberglass and a foam core to meet most load requirements for tempo -
rary dead ends.
• Load limit - 500 lbs. per position or 1,000 lbs. total load limit.
• Arms have two holes with 18” spacing to accommodate 5/8” diameter hardware bolts for dead ends. Two alu-
minum sleeves are installed to prevent wear on the fiberglass arm.
• Steel mounting brackets have multiple holes for adjustment to fit various arm sizes. Note: adjustment range is
described for all catalog numbers shown below.
• Arms can be installed on either the top or bottom of existing cross arms.
• Two styles are available. Butt swivel eye to dead end a single phase tap line or a 3 way aluminum alloy equip-
ment mounting bracket for mounting a cutout, lighting arrester and a dead end tap line.
• When utilizing the butt swivel or the equipment mounting bracket for temporary hanging of a tap line; only
slack spans are recommended with loads not to exceed 150 lbs., providing that the Dead End Arm is being held
captive on the crossarm.
| CAT NO |
DESCRIPTION |
HEIGHT ADJUSTMENT |
WIDTH ADJUSTMENT |
LBS |
| 7674 |
ARM WITH 3 WAY BRACKET |
4 5/8”, 4 7/8”, 5 7/8”, 6 1/8” |
3 7/8”, 5”, 6 1/8” |
34 .0 |
| 7675 |
ARM WITH BUTT SWIVEL |
4 5/8”, 4 7/8”, 5 7/8”, 6 1/8” |
3 7/8”, 5”, 6 1/8” |
30.0 |
| 7676 |
ARM WITH 3 WAY BRACKET |
4 5/8”, 4 7/8”, 5 7/8”, 6 1/8” |
6 1/8”, 7 1/4”, 8 3/8” |
34.5 |
| 7677 |
ARM WITH BUTT SWIVEL |
4 5/8”, 4 7/8”, 5 7/8”, 6 1/8” |
6 1/8”, 7 1/4”, 8 3/8” |
30.5 |
| 11016 |
CONDUCTOR HOLDER TO FIT ALL DEAD
END ARMS |
3.2 |
||
| 7678 |
CONVERSION KIT TO CONVERT ITEMS
7674 AND 7675 TO ADAPT TO ARM WIDTHS 6 1/8”, 7 1/4”, and 8 3/8”. INCLUDES 2 BOLTS, 2 WING NUTS, AND 2 BRACKETS |
1.5 |
||
| 7679 |
CONVERSION KIT TO CONVERT ITEMS
7676 AND 7677 TO ADAPT TO ARM WIDTHS 3 7/8”, 5”, and 6 1/8”. INCLUDES 2 BOLTS, 2 WING NUTS, AND 2 BRACKETS |
1.5 |
||
