HOT LINE INDICATOR
• Designed for both distribution and transmission use
• Both models verify line conditions/voltage prior to use with an audible signal plus flashing lights
• The audible signal is 90 decibels, and banks of red lights flash intermittently to warn the operator of
voltage potential
• Both units incorporate a single push button on-switch that is timer oriented and will automatically
shut the unit off after a period of inactivity
• Each time the Hot Line Indicator is turned on, each model will run through a pre-programmed test
cycle and a green pilot light will remain on, indicating the unit is operating properly
• The distribution model 6701 includes a wide range of pre-set voltage levels (600V, 2000V, 7000V,
11000V), which assist the operator in determining whether full line voltage or a lesser voltage is
present
• The transmission model is for voltage ranges from 69KV to 500KV
• Both units include 2” diameter hook for contacting conductor and switch gear. Each unit comes with
a universal fitting and must be attached to an approved hot stick or hot line tool before use.
• Includes carrying case
• Operates on 9-volt battery - also included
• Bushing adapters available for 6701. For URD applications.
| CAT NO |
DESCRIPTION |
LBS |
| 6701 |
0-46KV HOT LINE INDICATOR COMPLETE
WITH CARRYING CASE, BATTERY, CONDUCTOR HOOK, OPERATING
INSTRUCTIONS AND SAFETY GUIDE |
3.7 |
| 6701-1 |
SAME AS 6701 EXCEPT WITH A LARGER
STORAGE CASE FOR STORING BUSHING ADAPTERS |
4.2 |
| 266 |
BUSHING ADAPTER FOR 15KV AND 25KV
LOADBREAK BUSHING ALSO ADAPTS TO ELASTIMOLD 35KV
BUSHINGS |
1.5 |
| 267 |
RTE 35KV BUSHING ADAPTER |
1.8 |
| 6780 |
69-500KV TRANSMISSION HOT LINE
INDICATOR |
3.7 |
