芝加哥拉纜夾-用于無外層鋼芯鋁絞線、鋁線、多股銅線, 彈簧鎖扣

SKU: 1656-30
圓形纜托內平滑設計。
適用于鋼芯鋁絞線，
鋁線和多股銅線。
纜托內部平滑，提供Z
的接觸面，
避免線芯受損。
Hot-line grips for both bare and insulated conductors.
Grip may be placed on wire with hot-line stick.
When stick is removed
Weight: 
0.56 lbs
0.26 kg
警告：拉纜夾為暫時安裝使用，不可長期處于錨定狀態。
警告：當使用或靠近電源線時，需先使拉纜夾處于落地絕緣以及隔離狀態后再進行拉纜工作。
警告：不可C過載重量。
警告：必須使用與尺寸和類型匹配的拉纜夾具。
警告：每次使用前，需先清潔纜托并檢查其工作狀態，避免操作時滑落。S
Grips are to be used for temporary installation, not for permanent anchorage.
When used on/or near energized lines, ground, insulate, or isolate grip before pulling.
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Always inspect equipment before use.
Do NOT exceed maximum safe load as listed on the label attached to the product.