芝加哥拉纜夾具 - PVC 電纜

Submitted by bmelland on Wed, 2012-11-14 11:42
SKU: 1659-30
機械特殊制作，波浪式纜托設計，適用于夾放絕緣電纜，降低因滑動導致絕緣外層的損壞。
確保絕緣層不被剝落。
圓形纜托。
Serpentine jaws are specially machined to allow insertion of insulated conductor through the jaws
警告：拉纜夾為暫時安裝使用，不可長期處于錨定狀態。
警告：當使用或靠近電源線時，需先使拉纜夾處于落地絕緣以及隔離狀態后再進行拉纜工作。
警告：不可C過載重量。
警告：必須使用與尺寸和類型匹配的拉纜夾具。
警告：每次使用前，需先清潔纜托并檢查其工作狀態，避免操作時滑落。S
Grips are to be used for temporary installation, not for permanent anchorage.
When used on/or near energized lines, ground, insulate, or isolate grip before pulling.
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Always inspect equipment before use.
Do NOT exceed maximum safe load as listed on the label attached to the product.