Dual Display Digital Voltmeter - DDVM-40

DoubleVision Dual Display Digital Voltmeter

The Double Vision^® Dual Display Digital Voltmeter, model DDVM-40, is a compact, high accuracy dual display voltmeter and phasing set with capacitive test point mode and peak hold.  Voltage is displayed on the two large, bright LED displays that can easily be read from a distance or in bright conditions.  The two LED displays are synchronized so that the same voltage reading is shown on both displays.

The DDVM-40 measures voltage from 5V to 40kV.  The two stick design can be used in both overhead and underground applications – accurate & repeatable to within 1%.

Double Display is Key -  Oversized, bright LED read out on two displays makes voltage measurements easy to read from a distance or in low light conditions.

Versatility . . . Simplified
Single button interface controls all modes:
• Line to line measurements
• Line to ground measurements
• Capacitive test point
• Cable fault testing
• Real time & peak hold reporting

Defined by the Jobsite - Lightweight, weather-resistant construction, ideal for use in tight work environments with minimum approach distances or with storm duty during disaster relief.

Features and Benefits

·         Peak Hold mode

·         Capacitive Test Point mode

·         Oversized, dual digital LED display

·         One button operation for test modes

·         Ultra-light, high-strength molded housing

·         Dual hotstick connections - universal spline and shotgun stick

·         Highly accurate, within 1% of the reading

·         Dual battery monitor with auto shut off

·         Measures AC and DC voltages

·         Powered by two 9V lithium or alkaline batteries in an easy to change battery case - no tools required

HD Electric Company is committed to ongoing review and improvement of its product lines, and thus reserves the right to modify product design and specifications without notice.

DVM系列多功能核相儀
DVM系列多功能核相儀具有體積小巧，便于攜帶，測量
精度高，支持有線/無線核相等特點。設有電容測試點
模式，具有峰值保持功能。可測電壓為5V-40KV。雙探
頭設計使產品既可用于架空線路測量，也可用于入地電
纜地面設備測量，同時BZ電壓測量以及核相工作的穩
定和準確。
DVM系列包含以下產品型號：
DVM-80UVM便攜型多功能核相儀
DDVM-40大屏幕多功能核相儀
DDPM-40大屏幕多功能無線核相儀
產品特點：
三位半數字顯示
背光顯示屏，強光或弱光環境下均可輕松讀數
可測電壓為40KV
電壓測量精度為1%
適用于架空線路和入地電纜地面設備
可配合標準絕緣桿使用

DVM 系列多功能核相儀參數表

	DVM-80UVM	DDVM-40	DDPM-40
無線測量功能	無	無	有
相位角測量	無	無	有
適用電壓范圍	5V–40KV
電壓測量頻率	25–1000Hz
電壓測量精度	1%±3 字讀數
數據保持功能	有
自動關機功能	有
工作環境溫度	-29°C-49°C
電池類型	9V 堿性電池 1 節	9V 堿性電池 2 節	9V 堿性電池 2 節
電池壽命	約 15 小時	約 8 小時	約 8 小時
數顯尺寸	0.4”	0.7”
連接/接地線長度	延展Z長約 3 米	延展Z長約 3 米	延展Z長約 3 米
儀器重量	1.02kg	1.82kg	1.02kg（單個探頭）

DVM 系列多功能核相儀選型指南

套裝型號	套裝詳細配置
DVM-80UVM	DVM-80UVM(1)/025-OLPS-5(2)/CS-DVM(1)
DVM-80UVK	DVM-80UVM(1)/025-OLPS-5(2)/R-80(2)/ASP-15/25(2)/CFT-35(1)/ PT-5000B(1)/HAS-2500(2)/B-12(1)
DVM-80UVM	(1)/025-OLPS-5(2)/R-80(2)/ASP-15/25(2)/CFT-35(1)/
DDVM-40	DDVM-40(1)/025-OLPS-5(2)/CS-DDVM(1)
DDVM-40/K01	DDVM-40(1)/025-OLPS-5(2)/PT-5000B(1)/CS-DDVM(1)
DDVM-40/K02	DDVM-40(1)/025-OLPS-5(2)/PT-5000B(1)/ASP-15/25(2)/CS-DDVM(1)
DDVM-40/K03	DDVM-40(1)/025-OLPS-5(2)/PT-5000B(1)/ASP-15/25(2)/CFT-35(1)/CS-DDVM(1)
DDPM-40	DDPM-40(1)/025-OLPS-5(2)/CS-DDVM(1)
DDPM-40/K01	DDPM-40(1)/025-OLPS-5(2)/PT-5000B(1)/CS-DDVM(1)
DDPM-40/K02	DDPM-40(1)/025-OLPS-5(2)/PT-5000B(1)/ASP-15/25(2)/CS-DDVM(1)

DVM系列多功能核相儀配件

Raise the Standard - The All New Double Vision™ Digital Voltmeter/Phaser.The Dual Display Digital Voltmeter, model DDVM-40, is a compact, high accuracy dual display voltmeter and phasing set with capacitive test point mode and peak hold.   Voltage is displayed on the two large, bright LED displays that can easily be read from a distance or in bright conditions. The two LED displays are synchronized so that the same voltage reading is shown on both displays.