臺灣標準電機SEW儀器儀表--1810 EL ELCB Testers Analog

  • <input id="e7qzs"></input>

        1.     
           
          1810 EL   ELCB Testers
          50mA  
          Analog  
          1810 EL
          FEATURES
           
           Taut Band movement.
           Simple operation.
           Wiring check.
           Robust.
           Can be used on 2 wires L-E (ELCB/RCCB/GFCI tester).
           Can be used on 3 wires L-E-N (with wiring check).
           No batteries required.
           Sense automatically 50 or 60 Hz.
           Current injected in phase with the voltage.
           Other voltage optional (110V).
           , .
          SPECIFICATIONS
           
          Current Settings 10-50mA@230Vac
          Current Selection Knob
          Frequency of Operation 50/60 Hz Sinusoidal
          Over-Temperature Protection No
          Operating Voltage (L-E) 230 Vac +/- 15%
          Meter Accuracy +/- 1% of full scale
          Protection Fused (200mA 250V)
          Operating Temperature -5 degree C to 45 degree C
          Storage Temperature 10 degree C to 85 degree C
          Battery None
          Dimensions 170(L) x 165(W) x 92(D) mm
          Weight Approx 730g
          Accessories Test leads (TEL-1810)
          Shoulder belt (BET-1800)
          Instruction manual
          特 點
          ● 吊線式高品質防震錶頭。
          ● 操作簡易。
          ● 可做L-E的兩線測試(ELCB/RCCB/GFCI)測試。
          ● 可做L-E的三線測試(檢測接線正確與否)。
          ● 50Hz或60Hz都能適用。
          ● 不必使用電源 (電池)。
          ● 有不同電壓可以選擇(110V或230V)。
          ● 符合。
          規 格 (23°C±5°C <80%R.H.)
          電流範圍 10-50mA(230Vac)
          電流設定方式 旋鈕
          適用頻率 50Hz或60Hz
          過溫保護 無
          操作電壓(L-E) 230Vac ±15%
          刻度指示準確度 ±1%滿刻度
          保險絲保護 有(200mA 250V)
          操作溫度 -5°C到45°C
          儲藏溫度 -10°C到55°C
          電池 170(長)×165(寬)×92(高)mm
          重量 約730公克(含電池)
          <pre id="e7qzs"></pre>
            <tr id="e7qzs"><code id="e7qzs"></code></tr>