臺灣標準電機SEW儀器儀表--4136 mO Low Resistance Ohm Testers
<kbd id="c8kak"></kbd>
  • <cite id="c8kak"><dl id="c8kak"></dl></cite>

              
           
          4136 mO   Low Resistance Ohm Testers
          4136 mO
          FEATURES
           
           Four terminal measurement.
           Measures down to 100u Ohm.
           5 Ranges from 200.0M Ohm to 2000 Ohm.
           Maximum resolutio of 100u Ohm.
           Three test current with over-temperature protection.
           Protection against inadvertent connection to over-voltage.
           Large LCD.
           Potential lead resistance, current lead resistance checks.
           "Full-Featured" EnerSave (tm) indide.
           EnerSave (tm) Auto-Hold.
           EnerSave (tm) Auto-Off.
           Lightwight, robust & compact.
           Indicators show if reading may be invalid (Rp, Rc, and temperature).
           "O-Ring" sealed case.
           Future optional rechargeable battery.
           , EN 61326-1, EN 61326-2-1, EN 61326-2-2, CISPR II, EN 61000-4-2, EN 61000-4-3
          SPECIFICATIONS
           
          Measuring Ranges 0-200.0M Ohm in steps of 100u Ohm
          0-2000M Ohm in steps of 1M Ohm
          0-20.00 Ohm in steps of 10M Ohm
          0-200.0 Ohm in steps of 100M Ohm
          0-2000 Ohm in steps of 1 Ohm
          Accuracy +/- 0.5% of reading +/- 2 digits over the operating temperature range, -15 degree C to +55 degree C with the supplied test leads
          Test Current 1mA => 2000 Ohm range
          10mA => 200/20 Ohm ranges
          100mA => 2000/200M Ohm ranges
          Test Current Accuracy +/- 0.1%
          Power Source 110VAC or 230VAC
          Protection Fuses Mains = 0.5A, HBC, 5 x 20mm, DIN
          Current = 0.5A, HBC, 5 x 20mm, DIN
          Voltage = 0.5A, HBC, 5 x 20mm, DIN
          Maximum Output Voltage (C1-C2) 20V
          Dimensions 205(L) x 190(W) x 110(D)mm
          Weight Appox. 1530g
          Accessories Test leads
          Shoulder belt (BET-2800)
          Instruction manual
          特 點
          ● 使用電源:110V/230V交流電
          ● 使用四個端點量測。
          ● Z低可量測至100uΩ
          ● 量測檔位從200.0mΩ到2000Ω共五檔。
          ● 過溫保護設計。
          ● 過壓保護設計。
          ● 使用寬廣型液晶顯示器,容易識讀。
          ● 電源耗電微小。
          ● 自動讀值鎖定設計。
          ● 自動關機。
          ● 通過歐洲安全規範驗証:
          EN 61010-1 CAT Ⅳ 20V
          EN 61326 -1
          規 格 (23°C±5°C <80%R.H.)
          TEL-4136C

             
          TEL-4136C測試線 規 格
          ● 名稱 : 凱文測試線(Kelvin clip test lead)
          ● 線材 :
          長度 : 700±30mm
          材質 : PVC 絕緣線,連接插頭部份為10公分的矽膠線
          外徑 : 4mm
          ●Input plug顏色 : 紅色、綠色、黑色、藍色