 |
| |
PD-20S High Voltage Testers
H.V. Probe
Input Impedance : 500M Ohm for scope
|
 |
|
|
FEATURES |
| |
 PD-20 and PD-28 have the same shape and color but different specifications. |
| Meet |
| PD-20 is a high voltage probe that is used with DMM |
|
| PD-20 and PD-28 are high voltage probes. They measure both AC and DC voltages with your multimeter. They consist of 2 kinds of contact tips, a test clip for the ground, a set of test leads for multimeter and a high qualify enclosure. The enclosure has very good insulation properties. |
| They are lightweight and ruged. Two kinds of contact tips are avaialble. One is a round needle tip for normal use. Another is a special flat spring type for CRT anode. |
| Before taking any measurements, first connect the alligator clip of this probe to earth ground and amke sure connection is proper. |
| PD-20S for scope. |
|
| SPECIFICATIONS |
| |
| Input Impedance |
500M Ohm. |
| Attenuation Ratio |
1000 : 1 |
| Accuracy |
DCV (0 ~ 20kV) +/- 1%, DCV (20kV ~ 30kV) +/- 2%, ACV (0 ~ 20 kV) typically +/- 5% at 60Hz |
| Max. Working Voltage |
30kV DC or 20kV AC |
| Operating Temperature |
0 degree C ~ 50 degree C |
| Storage Temperature |
-10 degree C ~ 60 degree C |
| Cable Length |
1m |
| Weight |
Approx. 260g |
|
