| TYPE |
Molded case circuit breaker tester |
| PHYSICAL SPECIFICATIONS |
Dimensions: 16”W x 14”H x 13” D (40.6 cm x 35.5 cm x 33 cm)
Weight: 93 lbs. (42.2 Kg) |
| INPUT POWER |
100 – 120 Vac or 200 – 240 Vac (factory-pre-set), 50/60 Hz |
| INTERNAL CURRENT METER |
1 A – 3,000A; accuracy: 1% of reading, ±2 digits |
| MEASUREMENT METHOD |
Isolated CT |
| TIMER STOP INPUTS |
Voltage input (20V – 300V, dc or peak ac), dry contact input, or removal of test current |
| TIMER READING RANGE |
0.1ms – 2 hours (also displayed in cycles); accuracy: 0.1% of reading, ±0.1ms |
| OUTPUT CURRENTS |
500A @ 4V, 125A @ 14V, 25A @ 70V |
| DISPLAY |
Back-lit LCD screen (128 x 64 pixels); viewable in bright sunlight and low light levels |
| SAFETY |
|
| HUMIDITY |
90% RH @ 40°C (104°F) non-condensing |
| TEMPERATURE |
Operating: -10°C to +50°C (+15°F to +122°F)
Storage: -30°C to +70°C (-22°F to +158°F) |
| ALTITUDE |
2,000 m (6,562 ft) to full safety specifications |
| CABLES |
Two 5-foot (1.5m) #2/0 current cables, two 8-foot (2.5m) external timer input cables with alligator clips, one ground cable, one power cord |
| FURNISHED ACCESSORIES |
Shipping case |
| WARRANTY |
One year on parts and labor |
| Specifications are valid at nominal voltage and ambient temperature of +25?C (+77?F). |
