|
| Transformer Winding Resistance Meters
----------部分中文介紹產(chǎn)品已停產(chǎn)或參數(shù)有變更，內(nèi)容僅供參考。 |
Transformer Winding Resistance Meters
|
|
|
|
|
Load Tap Changer Analyzer
|
 |
|
|
|
|
|
 |
Part Number(s)
9033-UC
 View Full Specs |
The LTCA-10 Analyzer is a second generation load tap changer analyzer. The LTCA-10 accurately measures winding resistance of highly inductive power transformers. Triple resistance-reading channels allow the measurement of three winding resistances simultaneously. Four-wire (Kelvin) connections provide high accuracy and require no lead compensation. A special feature of this device is its ability to measure and graph the resistance trace of a transformer LTC during operation. Using a 60Vdc power supply, the LTCA-10 is capable of outputting 10 amperes.
|
- Auto discharge circuit for operator safety
- 3 resistance reading channels including one dynamic channel
- Digital resistance reading from 1 micro-ohm to 500 ohms
- Calculate equivalent resistance value at reference temperature
- Stores 50 static records and 20 dynamic records
- Built-in 4.5-inch thermal printer
- Weighs less than 44 lbs.
|
|
|
|
|
|
|
|
Load Tap Changer Analyzer
|
|
|
|
|
|
|
 |
Part Number(s)
9059-UC
View Full Specs |
The LTCA-40 Analyzer is a second generation load tap changer analyzer. The LTCA-40 accurately measures winding resistance of highly inductive power transformers. Triple resistance-reading channels allow the measurement of three winding resistances simultaneously. Four-wire (Kelvin) connections provide high accuracy and require no lead compensation. A special feature of this device is its ability to measure and graph the resistance trace of a transformer LTC during operation. Using a 60Vdc power supply, the LTCA-40 is capable of outputting 40 amperes.
|
- Auto discharge circuit for operator safety
- 3 resistance reading channels including one dynamic channel
- Digital resistance reading from 1 micro-ohm to 500 ohms
- Calculate equivalent resistance value at reference temperature
- Stores 50 static records and 20 dynamic records
- Built-in 4.5-inch thermal printer
- Weighs less than 44 lbs.
|
|
|
|
|
|
|
|
Transformer Winding Resistance Meter
|
|
|
|
|
|
|
 |
Part Number(s)
9007-UC
View Full Specs |
The TRM-20 is Vanguard Instruments’ third generation transformer winding resistance meter. The TRM-20 is designed specifically to measure DC resistance values of transformer windings, rotating machine windings, or any dc resistance of an inductive device.
|
- Auto-discharge circuit for operator safety
- Demagnetizes transformer after test
- Selectable test current from 1A to 20A
- RS-232C, USB, and Bluetooth computer interfaces
- Built-in thermal printer
|
|
|
|
|
|
|
|
Transformer Resistance Meter
|
|
|
|
|
|
|
 |
Part Number(s)
9060-UC
View Full Specs |
The TRM-203 is a three phase transformer winding resistance meter that allow the user to connect all test cables to the transformer bushings. The unit will then measure the transformer resistance value for each of the phases without the need to disconnect and reconnect cables for each phase. The TRM-203 can provide a fast and stable reading of very large transformers by utilizing a 60Vdc power supply. It is capable of outputting a selectable test current from 1A to 20A.
|
- Perform three phase test on a transformer without the need to switch cables
- Can provide individual Delta winding resistance values
- Can provide individual Wye (with no neutral) winding resistance values
- Demagnetize transformer after test
- Selectable test current from 1A to 20A
- Computer control via RS-232C, USB, or Bluetooth interface
- Built-in 2.5" wide thermal printer
|
|
|
|
|
|
|
|
Transformer Winding Resistance Meter
|
|
|
|
|
|
|
 |
Part Number(s)
9061-UC
View Full Specs |
The TRM-40 is Vanguard Instruments’ third generation transformer winding resistance meter. The TRM-40 is designed specifically to measure DC resistance values of transformer windings, rotating machine windings, or any dc resistance of an inductive device.
|
- Auto-discharge circuit for operator safety
- Demagnetizes transformer after test
- Selectable test current from 1A to 40A
- RS-232C, USB, and Bluetooth computer interfaces
- Built-in thermal printer
|
|
|
|
|
|
|
|
Transformer Resistance Meter
|
|
|
|
|
|
|
 |
Part Number(s)
9006-UC
View Full Specs |
The TRM-403 is a three phase transformer winding resistance meter that allow the user to connect all test cables to the transformer bushings. The unit will then measure the transformer resistance value for each of the phases without the need to disconnect and reconnect cables for each phase. The TRM-403 can provide a fast and stable reading of very large transformers by utilizing a 60Vdc power supply. It is capable of outputting a selectable test current from 1A to 40A.
|
- Perform three phase test on a transformer without the need to switch cables
- Can provide individual Delta winding resistance values
- Can provide individual Wye (with no neutral) winding resistance values
- Demagnetize transformer after test
- Selectable test current from 1A to 40A
- Computer control via RS-232C, USB, or Bluetooth interface
- Built-in 2.5" wide thermal printer
|
|
|
|
|
|
|
|
Trip Saver Box
|
|
|
|
|
|
|
 |
Part Number(s)
9062-UC
View Full Specs |
The Vanguard TSB can be used with a Vanguard ATRT-03 series turns ratio tester to perform transformer turns ratio tests using the same cable set provided with the TRM-203/403. Using the TSB, there is no need to connect and reconnect cables from the transformer after the initial connections are made. The user can conveniently perform resistance tests using the TRM-203/403 and turns ratio tests using an ATRT-03 without having to make trips to the transformer to connect and disconnect cables.
|
|
|
|
|
|
|
|
|
Winding Resistance Ohmmeter
|
|
|
|
|
|
|
 |
Part Number(s)
9056-UC [110V]
9057-UC [220V]
View Full Specs |
The WRM-10P is a low resistance ohmmeter with all of the features of the WRM-10 above. In addition to the features of the WRM-10, the WRM-10P includes a built-in 2.5" wide thermal printer that allows test records to be printed in the field. Test records can also be downloaded to a PC.
|
- Range from 1 micro-ohm to 2,000 ohm
- Up to 10 Amperes of test current
- Auto discharge circuit for operator safety
- Built-in 2.5" Thermal Printer, computer interface
- Stores 48 records of 63 readings
- Weighs less than 27 lbs.
|
|
|
